Which steel strand coil is easier to lay out ?

Which steel strand is easier to lay out at the construction site ?

A steel strand coil is easier to lay out , it should meet following three points,

1.  The roll is a regular cylindrical shape, not crooked or skewed

2.  The wire strand is collected tightly,evenly,neatly. Not chaotic and disorderly,  no strand wire tangled together

3. The straightness of steel strand is good .

Which problem will appear if it is difficult to release the wire strand?

1. If one coil of steel strand can not be released , this coil could not be used any more , this will cause the lose and increase the cost.

2. if one coil of steel strand only can be opened and wire -released slowly, this will effect the construction efficiency， increase a lot of construction time . 
   

It is very important for workers to release the wire strand easier. 

What are the reasons causing the difficulty of releasing the wires?

1. Package is not good.

2. Collect wire not evenly ,not neatly

3. Strand is not straight.

4. In transportation at bad road condition , there are no necessary fasten measures.
   

How does YUANXIAN XINKE solve these problems ?

Case 1 : Our customer in Canada 

Before the first cooperation , he feedback to us about his experience with other supplier , the details as below,

Possible Reasons:

1. Package is not good.

2. In transportation at bad road condition , there are no necessary fasten measures.

Our Solutions:

1.  We have strengthened the internal quality control of the factory, even a slight little skewed, we will not send to customer ,we will use it to cut fixed length products .

2. We strengthed the quality control in purchase wooden pallet , it must be solid , and dimention must be as per our purchase standard.

   3.As per customer request , we arrange following fasten solution,paid by client.

   4. On all our labels , there are reminder , remind there must be necessary fasten in re- transportation process.

Case 2: One our customer had following feedback when he bought other brand steel strand,

The straightness of steel strand is not good,

At the construction site ,the workers are all rushing to work, following situation appearred ,

Although workers had improper operation, the main reason is still that strand is not straight , and finally wast their a lot of time.

some suppliers want to have a low produce cost , they use a lower heat treatment temperature  , which will cause the strand is not straight.

Our Solution:

1. Although in the industry , the OKAY temperature for thermal stabilization treatment is 380 ℃ + - 20 ℃，we only make the temperature be 380℃ to 400 ℃. in all our strand producing.

2. When machine starts running or ends running , the temperature , running speed and two- tension values can not reach to setted values in an instant, this will cause the product performance not good ,

       Each mother coil ,around 18 tons , we will cut off the start 20 meters and the end 20 meters , which can not be used, and finally processed as wasted steel.

Case 3: At the construction site , workers may meet this situation,

            The strands are disorderly and disorganized

             Strand and strand intertwined when open the package.

Our Solution: 

In producing process, strands are arranged more neatly, tightly, and in a more orderly manner. 

Please see the video in our website  https://www.yxmaterial.com/matal-material/ , Strand Collect Tight,Even And Neat